We use cookies to enhance your experience. By continuing to browse this site you agree to our use of cookies. More info.
A group of researchers from Johns Hopkins University has developed a shock-absorbing material that protects like a metal but is lighter, tougher and reusable. Helmets, body armor and vehicle and aircraft equipment could all potentially benefit from the new foam-like substance.
We are excited about our findings on the extreme energy absorption capability of the new material. The material offers more protection from a wide range of impacts, but being lighter could reduce fuel consumption and the environmental impact of vehicles while being more comfortable for protective gear wearers.
Sung Hoon Kang, Study Senior Author and Assistant Professor, Mechanical Engineering, Johns Hopkins University
Kang, who is also a fellow at the Hopkins Extreme Materials Institute, intended to develop a material that would absorb even more energy than present automobile bumpers and helmet padding. Kang discovered that the standard materials utilized for these life-saving devices do not operate well at fast speeds and are not always reusable.
With high energy-absorbing liquid crystal elastomers (LCEs), which have mostly been employed in actuators and robotics, the research team was able to increase strength while lowering weight.
Objects weighing 4–15 pounds were struck at speeds of up to 22 miles per hour during studies to evaluate the material’s impact resistance. Due to the limitations of the testing equipment, the tests were restricted to 22 miles per hour, but the team is sure that the padding could safely absorb much higher impacts.
Kang and his colleagues are considering partnering with a helmet manufacturer to develop, build and test next-generation helmets for athletes and the military.
The study was published in the Advanced Materials journal.
The Johns Hopkins group also included Lichen Fang, a former graduate student; Thao (Vicky) Nguyen, a professor of mechanical engineering; Beijun Shen, a graduate student; Seung-Yeol Jeon, a former postdoctoral researcher at the Hopkins Extreme Materials Institute; and Zeyu Zhu, a former graduate student; and Nicholas A. Traugutt, and Christopher M. Yakacki, both from the University of Colorado Denver.
The study was funded in part by the Army Research Office (Grant Number W911NF-17-1-0165) and the Johns Hopkins University Whiting School of Engineering Start-Up Fund.
Liquid crystal elastomer structure tested in drop tester machine. Video Credit: Johns Hopkins University.
Jeo, S.-Y., et al. (2022) Synergistic Energy Absorption Mechanisms of Architected Liquid Crystal Elastomers. Advanced Materials. doi.org/10.1002/adma.202200272.
Source: https://www.jhu.edu/
Do you have a review, update or anything you would like to add to this news story?
In this interview, AZoM talks to Chris Aylott, Senior Engineer at Newcastle University, about fatigue testing in the development of low carbon transport solutions.
AZoM speaks with Dr. Nicola Ferralis from MIT about his research that has developed a low-cost process of creating carbon fibers from hydrocarbon pitch. This research could lead to the large-scale use of carbon fiber composites in industries that have thus far been limited.
In this interview, AZoM speaks with Marco Enger, Senior Tribologist from GGB, to discuss how nano fillers affect transfer films within tribological systems.
This product profile outlines the Versa Flex Checkweighers from Thermo Fisher Scientific.
The LQA 300 FT-IR wine analyzer combines performance, accuracy, ease-of-use, and speed for the analysis of finished wine, must and must under fermentation samples in less than 45 seconds—all in one compact solution.
The SpectraStar™ XT-R Benchtop NIR can analyze virtually any sample type in less than a minute, including solid, slurry, or liquid samples.
This article provides an end-of-life assessment of lithium-ion batteries, focusing on the recycling of an ever-growing amount of spent Li-Ion batteries in order to work toward a sustainable and circular approach to battery use and reuse.
Corrosion is the degradation of an alloy caused by its exposure to the environment. Corrosion deterioration of metallic alloys exposed to the atmosphere or other adverse conditions is prevented using a variety of techniques.
Due to the ever-increasing demand for energy, the demand for nuclear fuel has also increased, which has further created a significant increase in the requirement for post-irradiation examination (PIE) techniques.
AZoM.com - An AZoNetwork Site
Owned and operated by AZoNetwork, © 2000-2022