Presserv - Offshore Technology

2022-01-15 09:43:32 By : Ms. Tilly Hu

Presserv is a globally known and respected company in the field of corrosion protection and control.

Presserv is a globally known and respected company in the field of corrosion protection and control. Established in the UK in 1998, Aberdeen-based CSL specialises in the supply and application of vapour corrosion inhibitors (VCI) and vapour-phase corrosion inhibitors (VpCI).

Although based in the UK, Presserv is called on worldwide to both supply and manage corrosion protection projects for clients. We can help with anything from the supply of a single box of inhibitors to writing a full preservation manual, to supervising or managing the preservation element of your project on-site. We are registered with FPAL number: 10043473.

We are respected providers of corrosion inhibitors, preservation services, vapour corrosion inhibitors, vapour phase corrosion inhibitors, VPCI, VCI, equipment preservation, corrosion control, process inhibitors, pipe preservation, electrical preservation, mechanical preservation, rotating equipment preservation, and deluge preservation. Corrosion inhibitors for the offshore industry

Presserv has been an approved Cortec distributor since 1998. We are the oil and gas distributor in the UK and Kazakhstan for the Cortec range of corrosion inhibitors, and can supply these products to almost any country.

Cortec Corporation of Minnesota, US, is the world leader in VpCI technology. Over the last 40 years, the Cortec range of corrosion inhibitors has been very successfully used in the North Sea and beyond. Inhibitors for offshore corrosion prevention

The range of corrosion inhibitors available is endless. For oil and gas applications, we provide inhibitors and processes for electrical equipment, hydro-testing, mothballing and lay-up; inhibitor additives for process streams, deluge cleaning, and preservation; high-performance inhibited coatings and general bolt preservation. Vapour-phase corrosion inhibitor (VCI) technology

There are countless manufacturers of vapour-phase corrosion inhibitors (VCIs) or products claiming to be VCIs (able to protect in gaseous / air phase without physical contact of chemical). Some work effectively, some do not.

In response to the bad name VCIs were getting due to many products not performing as a VCI should, Cortec renamed its products VpCI, trade-marking the term ‘VpCI’ so that no-one else can claim to manufacture them. If you want to make sure a vapour-inhibiting chemical is effective, insist on using a Cortec VpCI. VpCI technology for the offshore industry

Cortec’s range of proven VpCI technology works by emitting a vapour that forms a layer on metal surfaces at a molecular level. This layer is self-replenishing (you can open and close boxes / enclosures), and will prevent or reduce corrosion activity down to acceptable levels. Some of Cortec products are listed as follows: Cortec VpCI-101 foam pads for JBs and small packages Cortec VpCI-111 emitters for large electrical enclosures of packages Cortec VpCI-609 powder for hydrotest applications or VpCI-609S for dry fogging Cortec VpCI-368 inhibited wax coating Cortec VpCI-329/322 oil additive Cortec M-528 additive for synthetic fluids Cortec VpCI-126 / Corpak film polythene for wrapping Cortec VpCI-Corrlube inhibited grease coating Cortec GalvaCorr, a new concept in cathodic protection Cortec VpCI-422 biochemical rust remover Economical vapour-phase corrosion inhibitors

Cortec also produces a range of EcoAir (air-powered aerosol) and EcoLine (soybean derivatives) vapour-phase corrosion inhibitors. The list is exhaustive so please contact us for information or advice.

Presserv is the leading specialist in preservation within the oil, gas and shipping industry globally. The company has developed unique solutions to take care of the customers' assets.

As rig owners focus on reducing cost and increasing asset lifecycle, it is critical to identify the appropriate preservation strategy for rig stacking.

Hibernia is located in the Jeanne d’Arc Basin, 315km east of St John’s, Newfoundland and Labrador, Canada, in a water depth of 80m.

The Anasuria Cluster, located approximately 175km east of Aberdeen in the Central North Sea, United Kingdom, incorporates the Teal, Teal South, Guillemot A and Cook fields, all of which share the Anasuria floating production, storage and offloading (FPSO) host platform.

The Dukhan field, operated by Qatar Petroleum (QP), is one of the largest producing oil fields on the west coast of the Qatar peninsula.

Bonga is the first deepwater project for the Shell Nigeria Exploration and Production Company (SNEPCO) and for Nigeria.

The Yme field is located in the Egersund Basin, 100km off the coast of Norway. It lies at a water depth of 93m in blocks 9 / 2 and 9 / 5 in the south-eastern region of the North Sea.

Discovered in July 2000, Kashagan was described as the largest field found in the past 30 years, the largest outside of the Middle East, with a projected output close to that of the Ghawar field in Saudi Arabia.

Elgin and Franklin lie 93m deep in the water the UK North Sea's Central Graben, approximately 240km east of Aberdeen.

The Brent oil and gas field is located 186km off the north-east coast of the Shetland Islands, Scotland.

The Azeri-Chirag-Gunashli (ACG) field lies 120km off the coast of Azerbaijan in 120m of water and contains 5.4 billion barrels of recoverable oil.

The Buzzard field is located in the Outer Moray Firth, central North Sea, 100km north-east of Aberdeen, UK, and 55km from the coast at Peterhead.

Presserv is pleased to confirm the recent change of name from Corrosion Solutions Ltd to Presserv Ltd.

Drilling contractors are being advised to consider the full picture of costs as they make increasingly tough choices surrounding preservation and lay-up for out-of-contract mobile drilling units.

Presserv AS, a Corrosion Control firm headquartered in Stavanger, Norway, has successfully completed its acquisition of Aberdeen-based Corrosion Solutions Ltd (CSL).

Corrosion Solutions Ltd. (CSL) specialise in the preservation of equipment and systems. We have been in business since 1998. Our company works worldwide on projects as diverse as lay-up / mothballing of FPSOs to the preservation of new oilfield construction projects, mothballing and lay-up of drilling assets to oilfield materials spares management.

Corrosion Solutions Ltd (CSL) specialises in the preservation of equipment and systems. Since 1998, our company has been working worldwide on projects such as lay-up and mothballing of drilling rigs, FPSOs and onshore facilities. All of this to ensure your facilities stays fit for purpose.

Corrosion protection and control company Corrosion Solutions (CSL) has sailed through its ISO 9001:2008 recertification by Lloyds, reinforcing its commitment to customer service and quality.

Corrosion Solutions (CSL) has been appointed as the sole distributor in UK for the Cortec™ range of Ecoline and VPCI packaging.

Corrosion Solutions Ltd (CSL) specialises in the preservation of equipment and systems.

CSL can develop a series of preservation procedures, detailing both the initial preservation requirements such as quantity and the application of corrosion inhibitors, bagging or wrapping etc and also detailing the active preservation requirements such as turning shafts periodically, operating valves, connecting power to electric motors to energise internal heating etc. These procedures would be forwarded to you for comment and approval.

Corrosion Solutions specialises in the preservation of equipment and systems. We have been in business since 1998. Our company works worldwide on projects as diverse as lay up / mothballing of FPSO's to the preservation of new oilfield construction projects and offshore materials spares management.

Corrosion Solutions (CSL) is a globally known and respected company in the field of corrosion protection and control.

At a time when oilfield safety is again in the headlines, onboard fire safety deluge systems are coming under some scrutiny by the Health & Safety Executive. As you can imagine, it is imperative that the deluge system is allowed to discharge its water exactly where it may be required to fight fir

Aberdeen-based Corrosion Solutions is looking to expand its network of project partners in order to maximise opportunities and efficiencies. The company has been well-established since 1999 and is a respected corrosion-control service contractor working around the globe as well as a lo

Oilfield safety is once again in the headlines and puts onboard fire safety deluge systems under scrutiny of the Health and Safety Executive. It is imperative that the deluge system is allowed to discharge its water exactly where it may be required to fight fires. Unfortunately, this is

Thank you for submitting the form. Your enquiry will be submitted to the company.